| ORTHORA 200 News |
4-functions pedal DYN Over the past few months we have completely reworked the chair and pedal controls which have led to several improvements. Since the beginning of this year this improvements are available and will be considered as standard. Since 01.01.2010 this pedal, if not otherwise required, is built on the ORTHORA 200 units as the standard pedal. A minimum and maximum value for the speed of a Micromotor or turbine and the intensity of an Ultrasonic device can be programmed per instrument within the four levels. With the 4-functions pedal the output of the values will be dynamic. A controlled and smooth acceleration is possible. There are 5 pedal versions or combinations available: - 4-functions pedal DYN built in on the unit - 4-functions pedal DYN freestanding - 4-functions pedal DYN built in on the unit plus a 1-function pedal DYN switched in parallel for the output of the values. - 5-functions pedal DYN built in on the unit (as used until now) - 5-functions pedal DYN freestanding MX Micromotor from BienAir This motor is perfectly suitable in combination with the 4-function pedal. The following is a short summary of the outstanding properties: - powerful at all speeds - Brushless construction without rotary encoder which make the MX non-sensitive against fluids and thus autoclavable conforming to the standard ISO 7785 - Micromotor with a very high efficiency which even at constant load ensures a comfortable temperature level - wide range of speed from 100 to 40'000 rpm Polaris LED lamp This lamp provides all known advantages of the LED light. The light intensity can be regulated continuous from 8'000 to 35'000 LUX. In addition there is also a continuous regulation of the colour temperature from 4'000 to 6'000 K. NEWTRON Ultrasonic device from Satelec The new and modern NEWTRON replaces the Suprasson device |
||
MIGMA 200 news |
Mixing bowl with a much improved closing mechanism A new mixing bowl with a much improved closing mechanism is now available. With the new bowl a maximum tightness is achieved. This prevents the Alginate powder and water from leaking and consequently has a positive effect on the life time uf the device. We recommend to replace the old bowls. Order number 430.2010.11 (set of 2 pcs).
|
||
Instrument pedal
ORTHORA 200 
Design